FAQs and Troubleshooting

This section lists the troubleshooting tips to resolve problems that you may encounter during installation, and post installation.

• Issue: The UI of the Quantum Fabric installer does not display appropriately if the display scaling factor is at 150%.

  Workaround: To avoid this issue, Temenos recommends changing the display scaling to 100% or 125%.

• Issue: After installing Quantum Fabric V9SP3 on a Tomcat application server with a MySQL database, publishing of Integration Services fails with the following error:

  Internal Error. Failed to check Server state - Failed to propagate Integration Services to Runtime. Status [deploy_failed]. Details - Database Migration failed with error : org.flywaydb.core.internal.exception.FlywaySqlException: Unable to obtain connection from database (jdbc:mysql://<URL>:<Port No.>) for user '<user>': Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
  SQL State : 08S01 Error Code : 0 Message : Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server. [ Tracking id - <ID>]

  Workaround: To resolve this error, add the following -D parameter to the catalina.bat file:

  -DSERVER_DB_USE_SSL=false

• Issue: If you have upgraded from version Fabric V8.x or earlier to version V9 GA or later, some of the services fail to work because of an internal authentication error. These services, such as the Fabric Admin Adapter, Email Adapter, and Workflow Email services, fail with the following error:

  returned HTTP [400], Response Body [{"details":{"message":"Could not find trust security group for given envId","errcode":0,"errmsg":"Could not find trust security group for given envId"},"httpstatus":"Bad Request","requestid":"5e36d604-09ab-4fbb-9437-42c1d828140f;98","domain":"AUTH","code":-65,"mfcode":"Auth-65","message":"Some of the input parameters provided are invalid"}]

  Workaround

  To avoid the error, you must perform the following:

  1. Log in to Fabric Console which you upgraded for V9.x.
  2. In your Kony Fabric account, click Environments. The Environments page appears.
  3. Click MODIFY for the environment. The Modify Environment page appears, shown below:

     

  4. In the Modify Environment page, click SAVE.

• Issue: While upgrading from MobileFabric 7.3 to Quantum Fabric V9 and then upgrading to a version after V9, the upgrade fails due to the following error:"java.sql.SQLSyntaxErrorException: Table 'prefixidglobaldbsuffix.schema_version' doesn't exist".

  Workaround

  To avoid this issue, perform the following step:

  • Delete the idglobaldb schema before upgrading to the version later than V9.

• Issue: The publishing of a Storage application fails on an environment that uses the SQLServer with Windows authentication.

  Workaround

  In the server_configuration table of the Integration database(admindb) insert the key KONY_SERVER_IS_WINDOWS_AUTHENTICATION_ENABLED with value set to true. Restart the application server.

• Issue

  The upgrade installation is rolling back with Validate failed from 8.2.1.3

  Workaround

  Before Upgrade, execute below SQL statement from admin database

  For MySQL
  ------------
  delete from <admindb>.schema_version where script = 'V62.1__konyadmin-mysql-8.2.0.0.sql';
  
  For SQLServer
  ---------------
  delete from <admindb>.schema_version where script = 'V62.1__konyadmin-sqlserver-8.2.0.0.sql';
  
  For Oracle
  ----------
  delete from <admindb>.schema_version where script = 'V62.1__konyadmin-oracle-8.2.0.0.sql';
  
  

• Issue

  If you upgrade the integration service or install on new server using the existing database but with a different server details like fully qualified URL port, and when you publish an app, the app publish fails.

  Workaround

  You must update management server details in the server_configuration table in admin database.

• How to change the Hostname/IP address and port details of an existing Quantum Fabric Server?

  After the installation of Quantum Fabric, if you want to change the existing Hostname/IP address that was used during the installation of Quantum Fabric, follow these steps:

  1. Go to your Quantum Fabric install folder.
  2. Go to scripts folder - for example, <MFinstallfolder>/scripts. The scripts folder contains a .sql file for the database type that you selected while installing Quantum Fabric.
  3. Open the .sql file in a text editor.

     IMPORTANT: If you want to access Quantum Fabric Console with a new port, change the value for the NEW_PORT with the new value. Otherwise, assign the value of the OLD_PORT to the NEW_PORT variable.

     IMPORTANT: If you want to access Quantum Fabric Console with a hostname/IP address, change the value for the NEW_HOST with the new value. Otherwise, assign the value of the OLD_HOST to the NEW_HOST variable.

  4. Change the values for the following variables.
     • For MySQL, MariaDB, and SQL Server, replace the values for the NEW_HOST and the NEW_PORT with new values.
     • For Oracle, replace all the occurrences of the NEW_HOST and the NEW_PORT with new values.
  5. Run the SQL script on the database where you have installed Quantum Fabric.

• How to change the Engagement Async Core version of an existing Quantum Fabric Server running on Tomcat?

From the Installer, you create a service having JVM params. The service gets registered in the WINDOWS Registry. To override any -D params we need to either change the registry entry or update the service. To change the Engagement Async Core version in your Quantum Fabric server running on Tomcat with Windows OS, do the following:

• Change the service in Windows Registry.
• Modify the JVM params by using Regedit.

• Issue

  If you face the error dialogue "Windows error 2 occurred while loading the Java VM" while launching the Quantum Fabric Patch Installer, because of the following:

  Quantum Fabric Patch Installer runs with your system's default Java. If an user machine has Java 8 installed, then check if the machine's System Environment Path for Java  or  JAVA_HOME  is set to c:\programdata\oracle\java\javapath

  Workaround

  1. Remove the current path from JAVA_HOME and set the new path as C:\Program Files (x86)\Java\jre1.8.0_40\bin
  2. Launch the Quantum Fabric Patch Installer.
  3. After the installation completed, reset the machine's  System Environment Path for Java  or  JAVA_HOME path to it's original path. For example c:\programdata\oracle\java\javapath

• Issue

  If your service provider's certificate is not configured, the system displays an error - "peer not authenticated."

  Workaround

  For trusted certification issues, refer to Service Provider's Certificate Issues.

• Issue

  When customer wants to install Quantum Fabric with Oracle as database type, the system throws the error: Invalid Data Type SDO_GEOMENTRY

  Workaround

  Install Oracle locator, which is required for Quantum Fabric installation. For more details, refer to Pre-installation Tasks > Create Locator Component for Oracle Database

• Issue

  Upgrading from Kony MobileFabric 6.5.2, 7.0.1 or 7.1.1 with MS SQL Server fails. Installer is rolling back, as the schema version table is not migrating properly while upgrade.

  Workaround

  To avoid this issue, follow this step:

  Remove the version_rank column from schema_version table in each schema by following queries before upgrade.

  drop index schema_version_vr_idx on master.<SCHEMA_NAME>.schema_version;
  
  alter table master.<SCHEMA_NAME>.schema_version drop column version_rank;

• Issue

  If you do not want to use a DB user with DBA role or Equivalent privileges for the Quantum Fabric installation on ORACLE database, follow these steps:

  Workaround

  Manual Steps:

  1. Create Component Users (schema) with the required grants as follows.

     CREATE USER <prefix>MFCONSOLEDB<suffix> identified by <password> default tablespace <dataTablespace> profile default;
     ALTER USER <prefix>MFCONSOLEDB<suffix> QUOTA UNLIMITED ON USERS;
     GRANT CONNECT,RESOURCE,CREATE VIEW TO <prefix>MFCONSOLEDB<suffix>;
     GRANT CREATE JOB TO <prefix>MFCONSOLEDB<suffix>;
     GRANT MANAGE SCHEDULER TO <prefix>MFCONSOLEDB<suffix>;

     CREATE USER <prefix>MFACCOUNTSDB<suffix> identified by <password> default tablespace <dataTablespace> profile default;
     ALTER USER <prefix>MFACCOUNTSDB<suffix> QUOTA UNLIMITED ON USERS;
     GRANT CONNECT,RESOURCE,CREATE VIEW TO <prefix>MFACCOUNTSDB<suffix>;
     GRANT CREATE JOB TO <prefix>MFACCOUNTSDB<suffix>;
     GRANT MANAGE SCHEDULER TO <prefix>MFACCOUNTSDB<suffix>;

     CREATE USER <prefix>MFREPORTSDB<suffix> identified by <password> default tablespace <dataTablespace> profile default;
     ALTER USER <prefix>MFREPORTSDB<suffix> QUOTA UNLIMITED ON USERS;
     GRANT CONNECT,RESOURCE,CREATE VIEW TO <prefix>MFREPORTSDB<suffix>;
     GRANT CREATE JOB TO <prefix>MFREPORTSDB<suffix>;
     GRANT MANAGE SCHEDULER TO <prefix>MFREPORTSDB<suffix>;

     CREATE USER <prefix>IDCONFIGDB<suffix> identified by <password> default tablespace <dataTablespace> profile default;
     ALTER USER <prefix>IDCONFIGDB<suffix> QUOTA UNLIMITED ON USERS;
     GRANT CONNECT,RESOURCE,CREATE VIEW TO <prefix>IDCONFIGDB<suffix>;
     GRANT CREATE JOB TO <prefix>IDCONFIGDB<suffix>;
     GRANT MANAGE SCHEDULER TO <prefix>IDCONFIGDB<suffix>;
     GRANT CREATE TABLE TO <prefix>IDCONFIGDB<suffix>;
     GRANT CREATE ANY INDEX TO <prefix>IDCONFIGDB<suffix>;
     GRANT ALTER ANY TABLE TO <prefix>IDCONFIGDB<suffix>;

     CREATE USER <prefix>ADMINDB<suffix> identified by <password> default tablespace <dataTablespace> profile default;
     ALTER USER <prefix>ADMINDB<suffix> QUOTA UNLIMITED ON USERS;
     GRANT CONNECT,RESOURCE,CREATE VIEW TO <prefix>ADMINDB<suffix>;
     GRANT CREATE JOB TO <prefix>ADMINDB<suffix>;
     GRANT MANAGE SCHEDULER TO <prefix>ADMINDB<suffix>;

     CREATE USER <prefix>KPNSDB<suffix> identified by <password> default tablespace <dataTablespace> profile default;
     ALTER USER <prefix>KPNSDB<suffix> QUOTA UNLIMITED ON USERS;
     GRANT CONNECT,RESOURCE,CREATE VIEW TO <prefix>KPNSDB<suffix>;
     GRANT CREATE JOB TO <prefix>KPNSDB<suffix>;
     GRANT MANAGE SCHEDULER TO <prefix>KPNSDB<suffix>;

  2. Create a non DBA user with the below grants. This user will be given to the Installer.

     CREATE USER <INSTALLER_USER> IDENTIFIED BY <password>;
     GRANT CREATE SESSION TO <INSTALLER_USER> WITH ADMIN OPTION;
     GRANT SELECT ANY DICTIONARY TO <INSTALLER_USER>;
     ALTER USER <INSTALLER_USER> QUOTA UNLIMITED ON <dataTablespace>;
     ALTER USER <INSTALLER_USER> QUOTA UNLIMITED ON <indexTablespace>;
     ALTER USER <INSTALLER_USER> QUOTA UNLIMITED ON <lobTablespace>;

     NOTE:   The password for the component users and the installer user have to be same.

• Issue 

  If you do not want to use a DB user with DBA role or Equivalent privileges for the Quantum Fabric installation on MSSQL, follow these steps:

  Workaround

  Manual Steps:

  Create database <prefix>mfreportsdb<suffix>;
  Create database <prefix>mfaccountsdb<suffix>;
  Create database <prefix>mfconsoledb<suffix>;
  Create database <prefix>admindb<suffix>;
  Create database <prefix>kpnsdb<suffix>;
  Create database <prefix>idconfigdb<suffix>;
  CREATE LOGIN loginId WITH PASSWORD = 'loginpwd'
  GO
  use msdb
  GO
  create user userId from LOGIN loginId;
  GO
  EXEC sp_addrolemember 'SQLAgentUserRole', 'userId'
  EXEC sp_addrolemember 'SQLAgentReaderRole', 'userId'
  EXEC sp_addrolemember 'SQLAgentOperatorRole', 'userId'
  GO
  use <prefix>mfreportsdbAN<suffix>
  GO
  create user userId from LOGIN loginId;
  GO
  GRANT ALTER ANY DATABASE DDL TRIGGER TO userId
  GO
  GRANT CREATE TABLE,CREATE TYPE,CREATE PROCEDURE,SELECT,UPDATE,DELETE,INSERT,EXECUTE,REFERENCES,CREATE VIEW,ALTER,VIEW Definition TO userId
  GO
  use <prefix>mfaccountsdb<suffix>
  GO
  create user userId from LOGIN loginId;
  GO
  GRANT ALTER ANY DATABASE DDL TRIGGER TO userId
  GO
  GRANT CREATE TABLE,CREATE TYPE,CREATE PROCEDURE,SELECT,UPDATE,DELETE,INSERT,EXECUTE,REFERENCES,CREATE VIEW,ALTER,VIEW Definition TO userId
  GO
  use <prefix>mfconsoledb<suffix>
  GO
  create user userId from LOGIN loginId;
  GO
  GRANT ALTER ANY DATABASE DDL TRIGGER TO userId
  GO
  GRANT CREATE TABLE,CREATE TYPE,CREATE PROCEDURE,SELECT,UPDATE,DELETE,INSERT,EXECUTE,REFERENCES,CREATE VIEW,ALTER,VIEW Definition TO userId
  GO
  use <prefix>admindb<suffix>
  GO
  create user userId from LOGIN loginId;
  GO
  GRANT CREATE TABLE,CREATE TYPE,CREATE PROCEDURE,SELECT,UPDATE,DELETE,INSERT,EXECUTE,REFERENCES,CREATE VIEW,ALTER TO userId
  GO
  use <prefix>kpnsdb<suffix>
  GO
  CREATE SCHEMA <prefix>kpnsdb<suffix>;
  GO
  create user userId from LOGIN loginId;
  GO
  GRANT CREATE TABLE,CREATE TYPE,CREATE PROCEDURE,SELECT,UPDATE,DELETE,INSERT,EXECUTE,REFERENCES,CREATE VIEW,ALTER TO userId
  GO
  use <prefix>idconfigdb<suffix>
  GO
  create user userId from LOGIN loginId;
  GO
  GRANT CREATE TABLE,CREATE TYPE,CREATE PROCEDURE,SELECT,UPDATE,DELETE,INSERT,EXECUTE,REFERENCES,CREATE VIEW,ALTER TO userId
  GO

  NOTE:

  • The whole script must be run at once.
  • The loginId and password must be the same as used for Quantum Fabric Installation.
  • The <prefix> and <suffix> provided must be the same across the script and must also be provided at the time of the Quantum fabric Installation.
  • You can use the same loginId and userId to avoid confusion.
  • The userId must be same across the script.

• Issue

  After entering Database details the DB connection fails with the following error:

  ERROR,main,action.LogFlywayJavaMigrations:17,installCore,ERROR: Unable to obtain Jdbc connection from DataSource (jdbc:mariadb://odc3dmv-mf-db01.in.dc.gov:3306/?relaxAutoCommit=true) for user 'madmin': Could not connect: Access denied for user 'madmin'@'odc3dmv-mf-web02.in.dc.gov' (using password: YES)

  

  Workaround

  The password used for the Database must not contain exclamation marks (!).

• Issue

  If you are using any lower versions of MySQL 5.7 such as v5.7.12 or lower during installation, you may encounter an error due to which the installation rolls back. This error occurs due to a bug in the MySQL database.
  For more information, refer MySQL Bugs

  Following are the error details:

  • Error: Migration V810_27_01__DeleteDuplicateAcsUserIdProviderGuidRowsAddUniqueConstraint.sql failed
  • SQL State: HY000
  • Error Code: 1093
  • Error Message: You can't specify target table 'users' for update in FROM clause
  • Location: <Location where the installation is done>

  Workaround

  To resolve this issue, refer Prerequisites for Quantum Fabric with MySQL- Applicable for Identity Services.

Upgrade Issue: FabricAdminAdapterTest Fails with JWT error

• Issue: If you have upgraded from Fabric V8.x or lower versions to Fabric V9 GA or higher versions, you must edit the environment in your on-premises Fabric Console to avoid issues such as:
  • The Admin Adapter, Email Adapter and Workflow email services will not work properly.

  • Issue: While execution of a Service Task in Workflow Service, if the service task fails with the following error.

    returned HTTP [400], Response Body [{"details":{"message":"Could not find trust security group for given envId","errcode":0,"errmsg":"Could not find trust security group for given envId"},"httpstatus":"Bad Request","requestid":"5e36d604-09ab-4fbb-9437-42c1d828140f;98","domain":"AUTH","code":-65,"mfcode":"Auth-65","message":"Some of the input parameters provided are invalid"}]

  Workaround

  1. Log in to your Fabric Console.
  2. In your Kony Fabric account, click Environments. The Environments page appears.
  3. Click MODIFY for the environment. The Modify Environment page appears, shown below:

     

  4. Click SAVE.

     Now you can execute the aforementioned services successfully.

Hostname/Port changes for Tomcat Application Server

Quantum Fabric On-Premises Installer provides a script to change the Hostname or Port of the installed Quantum Fabric instance. In your installed Tomcat Application Server, you must also perform the following changes:

In //tomcat/webapps/apiportal/WEB-INF/classes/config.properties, replace the existing URL with the new URL in the following fields:

• KONY_ACCOUNT_API_BASE_URL=
• KONY_DEVELOPER_PORTAL_BASE_URL=

In //tomcat/webapps/mfconsole/WEB-INF/classes/config.properties, replace the existing URL with the new URL in the KONY_ACCOUNT_API_BASE_URL= field.

In //tomcat/conf/server.xml, replace the port number with the new port number in the <Connector server="Kony" port= field.

In //tomcat/webapps/accounts/WEB-INF/classes/accounts.properties, replace the port number with the new port number in the following fields:

• KONY_INTEGRATION_SERVICE_PORT=
• KONY_MESSAGING_SERVICE_PORT=

Hostname/Port changes for JBoss Application Server

Quantum Fabric On-Premises Installer provides a script to change the Hostname or Port of the installed Quantum Fabric instance. The script can be found in the installation folder. In your installed JBoss Application Server, you must follow the instructions in the script and also perform the following steps:

1. In the standalone.xml file replace the IP address/port number with the new IP address/port number.
2. In mfconsole.war\WEB-INF\classes\config.properties, replace the existing URL with the new URL in the KONY_ACCOUNT_API_BASE_URL= field.
3. In apiportal.war\WEB-INF\classes\config.properties, replace the existing URL with the new URL in the following fields:
   • KONY_ACCOUNT_API_BASE_URL=
   • KONY_DEVELOPER_PORTAL_BASE_URL=
4. In accounts.war\WEB-INF\classes\accounts.properties, replace the port number with the new port number in the KONY_INTEGRATION_SERVICE_PORT= field.

How to Configure JBoss Cluster

• Refer to https://access.redhat.com/solutions/218053 to setup EAP in Domain mode.
• Refer to https://docs.jboss.org/mod_cluster/1.1.0/html/Quick_Start_Guide.html to configure the mod_cluster.
  • Refer to https://access.redhat.com/solutions/2332111 to integrate the mod_cluster with JBoss.

How to Configure Heap and PermGen Size

Configuring Heap and PermGen Size for Tomcat

By default, the heap settings for Tomcat allocated are Min -Xms1024m / Max - Xmx2048m, and default permgen settings are: -XX:PermSize=1024m -XX:MaxPermSize=1024m

For better performance in case of several publishes, update the following heap and permgen settings  in the file: {Installation directory}/tomcat/bin/catalina.bat

• heap settings: Min -Xms1024m / Max - Xmx1024m.

  IMPORTANT: While installing Quantum Fabric Components including Integration services, set the heap settings to: Min -Xms2048m / Max - Xmx2048m

• permgen settings : -XX:PermSize=1024m -XX:MaxPermSize=2048m

Configuring Heap and PermGen Size for JBoss

In case of multinode, do the following:

• Configure the Min -Xms2048m / Max - Xmx4096m heap settings in the file: { Server directory }/domain/configuration/host.xml
• Configure the Min -Xms2048m / Max - Xmx4096m heap settings in the file: { Server directory }/domain/configuration/domain.xml
• permgen settings : -XX:PermSize=1024m -XX:MaxPermSize=2048m

In case of single node, configure the settings in { Install directory }/jboss/standalone/configuration/standalone.xml

Configuring Heap and PermGen Size for WebLogic

Configure the Min -Xms6144m / Max - Xmx6144m heap settings in the file: {Server directory }/user_projects/domains/bin/setDomainEnv.cmd

1. Go to the {Server directory}/user_projects/domains/bin/ folder, and open the setDomainEnv.cmd file in a text editor.
2. Search for the following comment line:

   @REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values

3. Immediately after the comment line, add the following line:

   set USER_MEM_ARGS=-Xms6144m -Xmx6144m

4. Save the file, and then restart the WebLogic Server.

How to Configure Quantum Fabric Behind a Reverse Proxy

If you want to access everything via a proxy URL, including Quantum Fabric Console (for example, design time for your app developers) and authService, and integration services (for example, runtime from users using your apps), follow these steps:

1. Install Quantum Fabric with internal details like your internal IP and HTTP port.
2. After installation, stop Quantum Fabric Console (without configuring authservice details) and update the below properties files:
   1. In the  accounts.war/WEB-INF/classes  folder, open the accounts.properties  file, and update the WAAS_BASE_URL=<PUBLIC_URL_OF_YOUR_APACHE>/workspace property with a public URL instead of the private URL. By default, the private URL is set during installation.

      Examples of proxy URLs:

      • WAAS_BASE_URL=http://test.kony.com/workspace
      • WAAS_BASE_URL=https://test.kony.com:8443/workspace
      • WAAS_BASE_URL=http://test.kony.com:8080/workspace
   2. Following are the changes to be made in the war for each App Server:
      • Tomcat: In mfconsole.war/WEB-INF/classes, open the config.properties file, and update the KONY_ACCOUNT_API_BASE_URL=<PUBLIC_URL_OF_YOUR_APACHE>/accounts/api/v1_0/ property with a public URL instead of the private URL that was generated during installation.
      • JBoss - Standalone (Bundled JBoss): In Standalone/deployments/mfconsole.war, open the config.properties file, and update the KONY_ACCOUNT_API_BASE_URL=<PUBLIC_URL_OF_YOUR_APACHE>/accounts/api/v1_0/ property with a public URL instead of the private URL that was generated during installation.
      • JBoss - Pre-configured and Domain mode: Take a backup of the existing war. Undeploy mfconsole.war. In mfconsole.war/WEB-INF/classes, open the config.properties file, update the KONY_ACCOUNT_API_BASE_URL=<PUBLIC_URL_OF_YOUR_APACHE>/accounts/api/v1_0/ property with a public URL instead of the private URL that was generated during installation, and re-deploy the war file.
      • WebLogic: In mfconsole.war/WEB-INF/classes, open the config.properties file, and update the KONY_ACCOUNT_API_BASE_URL=<PUBLIC_URL_OF_YOUR_APACHE>/accounts/api/v1_0/ property with a public URL instead of the private URL that was generated during installation.
3. Start Quantum Fabric Console.
4. Launch your Quantum Fabric Console in browser by using <PUBLIC_URL_OF_YOUR_APACHE>/mfconsole. The auth setup page appears.
5. Enter the auth URL with public URL like <PUBLIC_URL_OF_YOUR_APACHE>/authService. If you provide an internal IP here, appconfig will show internal IPs.
6. Also after log in to Quantum Fabric Console, while registering server, provide the PUBLIC_URL to register integration server. Now all the URLs will have the public hostnames.

   If you want to give public access only to runtime services like authservice and integration services you can skip step 2 and step 3 from the above procedure. This will make sure service doc will have all public URLs.

   NOTE: Proxy configuration should have preserver host directive for Quantum Fabric to work correctly after start up.
   
   For example, in case of apache proxy, use ProxyPreserveHost On
and in case of NGINX, use proxy_set_header Host $host;(For more information, refer Passing request headers)

Preserving Proxy if Load Balancer or Proxy Server is Configured

To stop the load balancer from redirecting to the load balancer host, add the following properties in Application Servers > Server name > Web Container Settings > Custom Properties:

• com.ibm.ws.webcontainer.extractHostHeaderPort
• trusthostheaderport

For more information, you can refer to IBM Support.

How to Configure Frontend HTTPS to Tomcat HTTP Redirection

If you are installing Quantum Fabric on Tomcat on HTTP and wants to route requests via HTTPS apache or loadbalancer, add a connector in the tomcat/server.xml with the following attributes:

proxyName="<ProxyHost>" proxyPort="<ProxyPort>" scheme="https" secure="true"

Example:

<Connector server="KonyTEST" port="8080" protocol="HTTP/1.1" 
proxyName="mbaastest10.konylabs.net" proxyPort="443" scheme="https" secure="true" maxHttpHeaderSize="8192" maxThreads="150" enableLookups="false" acceptCount="25" disableUploadTimeout="true" tcpNoDelay="true" compression="on" compressableMimeType="text/css,text/javascript,text/html" connectionTimeout="20000" URIEncoding="UTF-8"/>

How to encrypt the database password

IMPORTANT: Encryption is only supported for Tomcat application servers.

Quantum Fabric provides a 256-bit AES/GCM/NoPadding encryption utility, which can be used to encrypt your database password. To encrypt your database password, follow these steps:

1. Download and extract the installation zip file or tar file.
2. From the extracted folder, open a terminal (console), and then execute the following command:

   java -jar EncryptionUtility.jar

3. In the Enter Password to be Encrypted field, type the password that is used to access your database.
4. In the Enter Key to be Encrypted field, type the key that must be used to encrypt the password.

The console then displays the Encrypted Password and Encrypted Key. These values must be typed in the Database Password and Encrypted Rotational Key boxes on the Database Details screen.